Prototype Sensor Shield Sensor Expansion Board Robots Shield for Arduino UNO R3

Description

Specification:
The module is compatible with Arduino UNO R3 sensor expansion board substrates, electronic building blocks related to functional modules and compatible with Arduino UNO R3 bridge connection between the motherboard. SPI interface board leads the motherboard, UART interface, the part of the digital interface and analog interface, easy DIY enthusiasts, arduino interactive designers will soon be quickly attached to the Arduino module on the motherboard, accelerate project development progress.
Expansion board features are as follows:
1. For Arduino UNO R3, Catduino and other compatible motherboard.
2. on-board reset circuit, power supply and reset the indicator.
3. can continue to stack additional features Arduino expansion boards.
4. Operate voltage:5V
Pin interface leads Resources:
1. SPI interface: two SPI interfaces shared SPI bus, chip select pin is not the same, you can enable the board to mount two SPI interface module;
2. Digital Interface: 7, each interface contains two signal lines and two with the power cord, can be articulated 3-wire or 4-wire module;
3. UART interface: TTL serial port, serial port module can be mounted.
4. Analog interface: 2, each interface contains two ADC signal and two with the power lines, analog signal output can be mounted sensor module can also be used as a normal digital interface;
5. I2C interface: 4, which can mount four addresses are not the same as the I2C interface module can also be used as an analog interface, the common digital interface (non-I2C interface use, the interface is not reusable);
6. Reset button: Press the touch of a button the side, making the reset operation more convenient;
7. Indicator: Red LED is reset LED, reset the light; Green LED for the power indicator, the motherboard provides a 5V power supply is normal that is lit;
8. Power Interface: from the motherboard 5V, direct supply various interfaces described above;
package Included :
1 x Prototype Sensor Shield Sensor Expansion Board Robots Shield for arduino UNO R3
Payment
Payment
Payable To
Note
PayPal
Paypal
All payments are due within 7 days of the close of auction. Failing to do so, non-paying bidders will be reported to eBay.
Shipping Policy
Delivery Time
We ship to worldwide, it usually takes 15-40 Business Days to delivery.
Shipping address
We ship to your PayPal address. Please, make sure to provide us with correct, precise, and detailed shipping Address.
Send Time
Items will be shipped within 1 to 3 business days upon payment received or cleared.
Note
If you don't receive items over 30 business days, please notify us via eBay message.
Return Policy
We appreciate your business and offer an instant 7 days return policy.(7 days after receive the item). The returned item has to be in its original condition. We are able to refund your money without shipping cost.
Contact us
For anything about product, price, shipping or order status, please contact us via eBay message.
We love positive feedback and 5 scores DSR. We will leave it for everyone that leaves it for us.
On Jul-18-17 at 06:33:38 PDT, seller added the following information: