NOS Aluminum V-Belt Pulley 5 Step, 3/4 inch bore

Description

Description:  NOS (new, old-stock) Aluminum V-Belt Pulley 5 Step, 3/4 inch bore.
This pagoda-type pulley can be used in various machine tools, and the 5-slot design is suitable for different speed ratio requirements.
This item came from a recently out-of-business tool and hardware company.  These pulleys were stored in bulk in a cardboard box.  As such, they were jostled about, and each has small scratches.  This does not affect their functionality.  Two had small chips, but I sold them separately at a discount.  There is also a small amount of corrosion from long storage.
The pulley is machined aluminum.
Steps in the pulley are as follows (my caliper measurements):
O.D.
I.D.
1)
2-3/4
1-3/4
2)
3-3/4
2-3/4
3)
4-3/4
3-3/4
4)
5-5/8
4-3/4
5)
6-1/2
5-5/8
Pulley outside width:
E
ach pulley step measures 5/8” from outside to outside - use with 1/2" belt.
Inside diameter of pulley (aka shaft, bore, center hole):
3/4”
If you have a 5/8” shaft, 5/8” to 3/4” adapters are available online, including ebay.
Keyway size:
3/16"
Pulley is held on with one (1) Allen bolt.  Allen bolt is included.  See photo.
Height:
When sitting on a flat surface, the height of the pulley is 3-1/4”.  See photo.
One number inside the pulley is 926-06.
Information online suggests that this is a Delta number, but I cannot confirm that.
I sell and ship only to the U.S.
Shipping discounts for more than one item.
Please contact me with any questions.
Thanks!